Model Pro 5 - K
MODEL GROVER PRO5-K
Size L-W-H: 95” x 18” x 18”
(2413mm x 457mm x 457mm)
Drive Motor: 1 HP
Operating speed: 30FPM – (10 Meters/minute)
Gauge capacity: .024 to .032 aluminum (.6mm to .8mm)
Max. 26 Gauge mild steel (.5mm)
Shipping weight: 900 pounds – (410 kg.)
• Round spool.
• Triangle spool for quicker and easier load.
• Heavy duty coil cradle for 1 side painted coil.
• Heavy duty coil cradle for 2 side painted coil.
• Stationary run out stand.
• Run out stand with 1 leg adjustable.
• Polyurethane drive rollers.
• Free float style (Alcoa hook).
• Fluted bottom for a stiffer gutter.
• Overseas wiring.
• 4 push button control box.
BEARING PLATES ARE SEPARATED FROM THE MACHINE FRAME
Another exclusive GROVER feature: "MACHINE WITHIN A MACHINE design".
This feature prevents the weight of the gutter coils from reacting on the working parts of the machine. The frame to which the gutter coils are attached is a completely separate unit from the working parts of the machine.
BEST DRIVE IN THE INDUSTRY
All the stations of the machines are driving stations, top and bottom. They are all spring loaded which creates a constant load on the material. The springs make the PRO6-K the most versatile machine on the market allowing you to run different material with virtually no adjustments. Our drive system allows to maintain a gap between the top and bottom rolls. Consequently, you do not need to keep the machine loaded with material from job to job. LESS WASTE!
All rollers contacting the finished surface of the gutter are hard chromium plated to insure against marking and give long roller life.
Heavy-duty shafts: 1-1/2" in diameter.
Practically no adjustments required. Minor adjustments for straightness are very easy to make and are located at the end of the machine. You do not need to go inside the machine to adjust it.
SINGLE CHAIN DRIVEN
Single drive chain for each section of the machine, which eliminates backlash. Each chain has its own idler tensioner.
This machine is almost free of maintenance. The only requirements are to keep the chain and the guillotine blade lubricated.
The cut-off tool is mounted on a slide and will adjust approximately 2".
An exclusive GROVER feature!
It is a double rack and gear shear.
POWDER COATED FINISH
GROVER stands behind its products by offering the only five-year material and workmanship warranty in the industry.